Go to maincontent

Step by step guide

Evolution: Replace Reel

Learn how to easily replace the reel on your Evolution pressure washer with this step-by-step guide. All you need are Torx 25 and one flathead screwdriver, or similar tools. Safety first! To prevent any accidents, ensure that your pressure washer is turned off and unplugged from its power source

1. Remove screws

Use torx T25 to unscrew screw a) & b).

2. Remove Handle

3. Disconnect internal hose

a)Use a flathead screwdriver or similar, to tilt out the U-pin.


b)Pull the internal house out of the reel

4. Unlock Reel

Put Reel in unlock position

5. Replace reel

Lift up old reel and replace it with a new reel.

6. Reassembly

a)Install internal hose and secure it with u-pin.


b)Install Handle.


c)Secure handle with two screws.