AVA adapters: Areas of use
a)AVA Accessory Swivel Joint (11-110-126) b)AVA Female To Male Hose Adapter (11-120-509) c)AVA Hose Connector (11-120-508) d)AVA-Male to ¼" BSP threads (95-100-489) e)AVA Male Lance Fitting 1/4" BSP (11-120-500) f)AVA Female Lance Fitting 1/4" BSP (11-120-501)
a) AVA Accessory Swivel Joint
(11-110-126)
The AVA Accessory Swivel allows you to rotate nozzles and other accessories in 15-degree increments, covering a full 360 degrees.
By turning the swivel, you can adjust the angle to always achieve the perfect working position, regardless of the task.
The swivel have a NATO Accessories Rail (1), which is a interface system standard for mounting accessory equipment.
b) AVA Female To Male Hose Adapter
(11-120-509)
An adapter that allows you to use AVA hoses and equipment on a Kärcher pressure washer.
How to assemble/disassemble a Female Hose Coupling a) see the article here:
The Female hose Coupling has AVA interface in both ends and could also be used to connect two AVA hoses together b).
c) AVA Hose Connector
(11-120-508)
Adapter that allows you to connect your Kärcher hose to an AVA pistol or AVA Telescopic lance
d)AVA-Male to ¼" threads
(95-100-489)
If you need an adapter with threads to connect AVA to a reel, you can easily do this by using a Female-Female coupling c) at the end of the hose b) and an AVA-Male to ¼" threads d) at the other end.
When you connect these, you get threads that you can use for any high-pressure equipment. AVA doesn't provide adapters for ⅜" or other variations, but you should be able to find them easily at stores that carry pipe fittings or at workshops.
How to assemble/disassemble a Female Hose Coupling c) see the article here:
e) AVA Male Lance Fitting 1/4"
(11-120-500)
The AVA Bayonet Male was created so that anyone already owning a range of equipment may still continue to use them, while combining them with new products from AVA.
The Male Bayonet nozzle fitting is a pressure washer adapter when you want to use accessories with threads on AVA or Kärcher pressure gun.
It has ¼" threads and should be used with maximum 160 bar.
f) AVA Female Lance Fitting 1/4"
(11-120-501)
This adapter is for lances or other fittings with 1/4” threads. Perfect if you want to use AVA or Kärcher accessories with other brands of pressure washers.
